Our water test online interprets the chemical readings for your pool, and advises which chemicals you need and how much to add:
pH Buffer “buffers” pools by preventing erratic fluctuations in pH. tA Balance – Total Alkalinity (tA) is a measure of the alkaline chemicals (carbonates, bicarbonates and hydroxides) dissolved in your pool.
Low tA levels can lead to corrosion/staining and make it difficult to control pH.
High tA levels can cause cloudiness, eye irritation and scale deposits.
Use pH Buffer to increase tA if it is low.
Main Benefits:
Buffers pH:
Buffered pH means that it will not change as quickly, this ensures that the water is in the ideal condition for swimmers more of the time.
Maintains Total Alkalinity:Correct alkalinity levels mean that there is a lower chance of staining or corrosion of pool surfaces and materials.
Instructions for use:
Total Alkalinity should be tested at the start of each season and at least twice each month. Maintain Total Alkalinity levels between 80-120ppm. If it is low add pH Buffer. Suitable for use in all pools/spas.
Dosage:
You can use our water test system to calculate the exact amount required or use the table below as a dosage guide.
Handling Advice
If medical advice is required have the product or label at hand.Wash hands thoroughly after handling.If in eyes rinse cautiously with water for several minutes and seek medical attention if irritation persists.